Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Installation Cost in Pomona?
Gate installation in Pomona typically costs $1,800 to $4,200 for a standard driveway gate, with most single-swing or sliding residential jobs landing in the $2,400 to $3,400 range. Adding an electric operator and access control pushes the total to roughly $3,500 to $7,500, depending on the motor, safety sensors, and entry hardware you choose. A basic pedestrian or garden gate runs $650 to $1,600 installed.
Those numbers come straight from the Pomona market, where clay soil, tight lots in Lincoln Park and the Wilton Heights area, and a mix of older Spanish Colonial properties and newer builds in the Phillips Ranch side all shape what a job actually takes. We’re a gate installation shop, so the quote you get from us is built around the hardware and the site, not a sales target.
Key Takeaways
- Most Pomona driveway gate installations fall between $2,400 and $3,400 before automation.
- A full electric system with operator, sensors, and access control runs $3,500 to $7,500.
- Sliding gates usually cost less to install than swing gates on the same driveway because they need less clearance and fewer hinges.
- Older properties near downtown Pomona often need post reinforcement or footing work that adds to the base price.
- We service nine gate and operator brands, so we can spec the operator that fits your existing hardware instead of forcing a switch.
Gate Installation Cost Breakdown (2026)
Here’s how the money breaks down line by line for a Pomona installation. Ranges assume standard residential driveways; a commercial property or a property manager outfitting multiple units will scale up from these figures.
| Line Item | Typical 2026 Range | Notes |
|---|---|---|
| Gate unit (steel or ornamental aluminum) | $700 – $2,200 | Size, material, and finish drive this; wood and custom iron run higher than stock panels |
| Posts and footings | $250 – $700 | Pomona’s clay-heavy soil often needs deeper footings; concrete-lined properties may need core drilling |
| Gate opener / operator (motors) | $450 – $1,500 | Brand and duty cycle matter; LiftMaster and FAAC swing/slide operators sit differently in this range |
| Safety sensors and reversing edges | $150 – $450 | Required for any automated gate; includes photo-eye and edge protection |
| Access control (keypad, entry, remote) | $200 – $800 | DoorKing and Linear entry systems cost more than a simple keypad |
| Labor and install | $400 – $900 | Driveway access, trenching for power, and gate weight all affect this |
| Electrical for remote location | $300 – $1,200 | Adds up when the driveway is far from the panel; low-voltage runs are cheaper |
| Permit (city of Pomona) | $75 – $300 | Most automated gates and any gate over 7 feet tall require one; we’ll tell you upfront |
What pushes the price up: a wide driveway needing a longer gate, an automated system with access control, an older property with root-bound or failing posts, and a remote driveway that needs a long power run. What brings it down: a standard single-swing manual gate on a newer slab, a sliding gate that uses the existing track base, or reusing a working operator. We recommend against cutting corners on footings and sensors to hit a lower number, because a sagging post or a failed safety edge costs more to fix later than it saves now.
What Affects Gate Installation Pricing in Pomona
- Soil and footings. Much of Pomona sits on clay soils that expand when wet and shrink when dry, so posts need deeper footings and stouter concrete than in sandier areas. We check the ground before we quote, because a driveway that sits on old fill in parts of the Phillips Ranch side behaves differently from a graded lot near Ganesha Park.
- Driveway width and gate type. A 10-foot single swing gate is cheaper to build and automate than a 16-foot double swing or a long sliding gate. Sliding gates often cost less on a wide driveway because they don’t need to swing into clearance space or carry as much load on hinges.
- Manual vs. electric. A manual gate is the lower-price route. Once you add an operator, safety sensors, and access control, the price climbs – and automating an existing manual gate later is usually cheaper than adding it after the fact only if the gate was built to handle a motor.
- Brand and operator match. If you already own a LiftMaster or Mighty Mule operator, we spec the gate to work with it. For full automation, we weigh FAAC, BFT, Viking, Ghost Controls, Elite, and Linear against your entry weight and duty cycle. Brand choice can move the motor line by several hundred dollars.
- Permits and city requirements. The city of Pomona requires a permit for most automated gates and for any gate over 7 feet. That adds a permit fee and a bit of scheduling time, and it’s the one line item you can’t skip.
- Access and trenching. A driveway that’s tight against a property line or far from the electrical panel takes more labor. Trenching for a power run to the gate is usually the biggest hidden cost on electric jobs.
How to Save on Gate Installation
You don’t have to accept the first big number. A few moves bring a Pomona install down without risking the work:
- Automate later if the gate can take it. If budget is tight, install a manual gate built to accept a motor down the road, and add the operator when you’re ready. We’ll spec the gate so the upgrade is straightforward.
- Keep the existing posts if they’re sound. Solid posts save the footing line item. We check them; if they’re failing, reinforced footings are cheaper than replacing the whole run later.
- Match the operator to the gate, not the other way around. Buying a bigger motor than the gate needs wastes money. We size the operator to the load and duty cycle, which often lands in the lower half of the motor range.
- Group access control. Adding a keypad, remote, and entry intercom in one install costs less than adding them piecemeal.
- Get a free estimate before you buy anything. A written estimate shows the real lines and stops you from over-buying hardware. Call (855) 382-5690 and we’ll walk the site.
We’re a single-trade gate specialist, which means our estimate reflects gate work only. We don’t bundle fencing or garage doors into the number, and we don’t push a brand we happen to stock. If your existing operator is fine, we’ll tell you to keep it.
Where Does Gate Installation Fit With Repair?
Not every job needs a new gate. We’re in the repair business first, and we’ll tell you when a fix is the smarter spend. If a failing operator or a bent gate can be repaired, that’s almost always cheaper than replacement. But when posts are rotted, the gate’s outlived its motor, or the hardware simply isn’t built to automate, replacement makes sense – and because we handle Gate Installation in Pomona in the same shop, there’s no handoff to a second contractor midway through.
Our technicians work on nine brands day in and day out, so we already know the faults and quirks of what’s on your property. If you’re weighing a repair against a fresh install, start at our home page and we’ll route you to the right service.
FAQs – Gate Installation Cost
Is it cheaper to repair a gate or replace it in Pomona?
Repair is usually cheaper when the damage is to the operator, hinges, or a single panel – a repair bill often runs a fraction of a full install. Replacement makes more financial sense when posts are failing, the gate is bent beyond a safe fix, or the hardware can’t support automation. We’ll only recommend a new gate when the old one has genuinely run its course.
How much does an electric gate installation cost in Pomona?
A full electric driveway gate typically runs $3,500 to $7,500 in Pomona, including the operator, safety sensors, access control, and the power run. The spread depends on the motor brand, your driveway layout, and whether trenching is needed. Call (855) 382-5690 for a free estimate on your exact setup.
Do I need a permit to install a gate in Pomona?
Most automated gates and any gate over 7 feet tall need a permit from the city, which adds roughly $75 to $300 to the job. We’ll point out what applies to your property before work starts, so there are no surprises on the permit line.
How long does gate installation take?
A manual single gate is often finished in a day, while a full electric install with access control usually takes one to three days depending on footing work and the power run. If your driveway is far from the panel or the soil needs deeper footings, it can run a little longer. We’ll give you a realistic schedule when we quote.
Can you install the gate to work with my existing operator?
Usually yes. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, and we’ll spec the new gate to match an operator that’s still in good shape. If the operator is past its service life, we’ll say so and lay out the options. Call (855) 382-5690 to talk through your setup.
Getting a Straight Number in Pomona
Gate installation in Pomona runs $1,800 to $4,200 for most driveways and can climb past $7,500 once automation and access control come into play. The number that matters is the one attached to your property, your driveway, and the operator you choose. We’re a gate-only specialist, we work on nine brands, and we’ll tell you plainly whether your job is a repair or a replacement. Call (855) 382-5690 for a free estimate and a written price before any work begins.
Pricing reflects the Pomona market as of 2026. Gate Repair Pomona offers free estimates – call (855) 382-5690.
What Our Customers Say
"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
- Craig Brooks"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
- Veronica Salazar"Fixed the immediate problem. He was honest that the operator is near end of life and I should budget for a replacement, which I appreciate even if it wasn't what I wanted to hear."
- Gilbert Torres