Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Montclair, CA
Gate installation in Montclair usually means replacing a gate and post system that dates back to the 1960s or 1970s, when most of the city’s tract homes were built. The original wood posts are often rotted at ground level, and the metal hardware has seized from decades of irrigation overspray and dry heat. Gate Repair Pomona handles the full replacement: new posts, new gate, new hardware, and automation if you want it. Call (855) 382-5690 for a free estimate on any gate project in Montclair.
Why Montclair Homes Are Different
Montclair’s housing stock is mostly single-family tract homes built between the 1950s and 1970s, and the gates that came with those homes are still standing in a lot of cases. The original posts were often set directly in soil without proper drainage, so rot and rust start at the base and work up. When we pull an old post in the 91763 ZIP code, we commonly find the buried portion has turned soft or crumbled entirely, even when the visible part still looks passable.
The climate does its own damage. Montclair gets hot, dry summers that bake wooden gates until they warp, and Santa Ana winds in the fall push hard against broad driveway gates, loosening hinges and pulling latches out of alignment. The pattern we see repeatedly is a gate that still hangs, but no longer closes cleanly, and a post that has shifted just enough to throw everything off. Then there are the metal latches: years of sprinkler overspray followed by dry heat causes the internal springs and pins to rust and seize. A latch that will not retract is one of the most common calls we get from Montclair homeowners.
This all means gate work in Montclair is less about tweaking a new installation and more about correcting decades of weathering. The good news is that the fix is usually straightforward once the post and hardware are addressed properly.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Montclair Services
Two services account for most of the calls from Montclair homeowners: repair work on gates and posts that have aged out, and repairs to the electric systems that operate motorized gates.
Gate Repair in Montclair
Most repair calls in Montclair start the same way: the gate has been dragging on the ground, or the latch will not catch, or a post is visibly leaning. When we arrive, the root cause is almost always the original post or hardware from the home’s 1960s or 1970s build. We reset or replace posts, install new hinges and latches, and rehang the gate so it swings true again. Gate Repair in Montclair covers everything from simple latch replacement to full post excavation and re-setting.

Electric Gate Repair in Montclair
Electric gates in Montclair have their own failure patterns. Control boards bake in the summer heat, safety sensors drift out of alignment, and the motors that push heavy driveway gates work harder when wind and warped gates add resistance. Our team works on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems, so we can read the fault codes on whatever brand you already own. Electric Gate Repair in Montclair gets your gate back in service, usually the same day.

Gate Installation in Montclair
Gate installation in Montclair usually means starting over the right way. The homes in this city were built mostly in the 1950s through 1970s, and a lot of driveway gates are still hanging on the original posts. By now those posts are rotted below grade or rusting through, which means a new gate bolted onto old posts will fail within a season or two. Gate Installation starts with addressing what is in the ground first.
Montclair’s heat and Santa Ana wind cycles also shape what we install. Wood gates need to be built with allowance for seasonal movement, and steel or aluminum frames need hardware rated for wind load. We quote the full scope up front, including post removal and disposal, so there are no surprises on install day.
Automatic Gate Installation
Signs you need it
You want the security of a closed gate without getting out of the car to open and close it every time you come or go.
What it costs in Montclair
Automatic gate installation in Montclair typically runs $2,100 to $3,300 for a single swing gate with a standard operator.
How we do it
We set new posts, hang and align the gate, mount the operator, run the power and low-voltage wiring, and finish by setting the open/close limits and safety sensors on site.
Driveway Gate Installation
Signs you need it
Your existing driveway gate is sagging, the post is leaning, or the gate no longer matches the security and look you want for the front of your home.
What it costs in Montclair
A new driveway gate in Montclair, with posts and hardware, typically runs $1,800 to $3,000 depending on width, material, and whether we reuse any existing structure.
How we do it
We remove the old gate and posts, dig and set new posts in concrete, hang the new gate, and adjust the hinges and latch until it opens and closes without drag.
Electric Gate Installation
Signs you need it
You want to automate an existing gate, or you are replacing an old chain-drive opener that has become too loud or unreliable.
What it costs in Montclair
Electric gate installation in Montclair typically runs $2,100 to $3,300, including the operator, safety sensors, and wiring from the panel to the gate.
How we do it
We verify the gate swings freely, mount the operator, run the power line to code, install safety photoelectric sensors and edge protection, and program the open and close limits.
Sliding Gate Installation
Signs you need it
Your driveway slopes or has limited swing clearance, so a sliding gate is the better fit for the site.
What it costs in Montclair
A sliding gate installation in Montclair typically runs $2,500 to $3,500 for a single track-mounted gate with hardware and operator-ready mounting points.
How we do it
We set the track and guide posts, hang the gate, install the track wheels and guides, and adjust the travel so the gate rolls smoothly from fully open to fully closed.
What Gate Installation Costs in Montclair
| Item | Typical range in Montclair |
|---|---|
| Driveway gate with posts and hardware | $1,800 – $3,000 |
| Automatic gate installation (single swing, standard operator) | $2,100 – $3,300 |
| Sliding gate installation | $2,500 – $3,500 |
Do I need a permit to install a gate in Montclair?
Montclair generally requires a permit when you are adding or moving posts, running electrical to an operator, or changing the gate footprint at the front of the property. We handle the permit application and inspection coordination as part of the install.
How long does a typical gate installation take in Montclair?
Most single driveway gate installations are done in one day, not counting the concrete cure time for new posts. Automated systems may need a short second visit for final programming and sensor testing.
Brands We Service in Montclair
We work on Linear, Viking, Ghost Controls, and DoorKing systems most weeks, and we carry common parts for those brands on the truck. That means fewer wait days for Montclair repairs when a board or sensor fails. Our brands page covers the nine gate and operator lines we support, including FAAC, BFT, LiftMaster, Elite, and Mighty Mule.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Montclair, CA
| Service | Typical range in Montclair |
|---|---|
| Driveway gate with posts and hardware | $1,800 – $3,000 |
| Automatic gate installation (single swing, standard operator) | $2,100 – $3,300 |
| Sliding gate installation | $2,500 – $3,500 |
| Gate post replacement (wood or metal, single post) | $300 – $700 |
| Gate hinge and latch repair | $120 – $300 |
| Gate frame repair (welding or reinforcement) | $200 – $500 |
| Electric gate diagnosis and repair | $150 – $400 |
| Control board replacement | $300 – $800 |
| Safety sensor replacement or realignment | $120 – $300 |
| Operator motor replacement | $500 – $1,200 |
In Montclair, prices on repair work climb when a post has rotted below grade and needs excavation, or when a wind-damaged frame needs welding before rehanging. Whatever the number, we quote it and you approve it before any work starts.
Neighborhoods We Serve in Montclair
We run calls all over the 91763 ZIP code, from the tract-home streets north of the 10 to the older neighborhoods closer to Arrow Highway. Our typical response time for Montclair gate work is same-day or next-day depending on call volume.
- Kingsley area
- Northeast Montclair
- Benson Avenue corridor
- West End near the Pomona line
- Mission Boulevard area
Service Area – Cities Near Montclair
Gate Repair Pomona also covers the communities around Montclair. If you are in Claremont, CA, La Verne, CA, Ontario, CA, or Upland, CA, call the same number at (855) 382-5690 for a free estimate.
Serving Montclair, CA – Our Local Coverage Area
We’re based in the Montclair area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Montclair
We offer same-day service for most Montclair repair calls placed before midday. Emergency calls, especially gates that will not close and leave a property unsecured, move to the front of the schedule.
Several Montclair neighborhoods have HOA or planned-community guidelines that restrict gate height, material, or color. We recommend checking your CC&Rs before choosing a gate, and we can match a design that fits within those rules.
We schedule installations during our normal hours. Installations take longer than repairs because posts need time to cure, so we coordinate the exact day and time window with you before the work is booked.
If your gate is sagging, seized, or dangerous to operate, call (855) 382-5690 now. A free estimate takes minutes, and the gate can usually be back in service the same day.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within the hour.
- 4You approve before work beginsNothing starts until you say go.
What Montclair Customers Say
"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
- Rosa Rodriguez"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
- Craig Brooks"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
- Veronica Salazar