Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Parts & Welding Cost in Pomona?
Most gate parts and welding jobs in Pomona run $180 to $850, with the typical repair landing near $320. A single hinge re-weld or a replacement latch sits at the low end, while a bent gate frame, snapped hinge post, or full set of roller and track parts pushes toward the top. Motorized gates with failed operators or damaged control boards can climb higher, since the parts and labor involved in an electric system are heavier than on a manual swing gate.
The honest answer is that a gate is a structural object, and what breaks determines the price more than the gate’s size does. We fix gates on their own and we don’t split our tools across fences, garage doors, or handyman work. When you call for an estimate on gate parts and welding in Pomona, we give you a range over the phone and a firm number once we’ve seen the hinge, post, or operator in person. Estimates are free.
Key Takeaways
- Typical gate parts and welding repair in Pomona: $180 to $850, with a median around $320.
- Re-welding a failed hinge or latch mechanism usually starts around $180.
- Straightening or re-welding a bent gate frame runs $350 to $650 depending on the metal thickness.
- Electric gate operator parts (motor, control board, safety sensors) add $250 to $1,200 on top of the welding itself.
- We work on nine brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so we rarely need to guess at a part.
Gate Parts & Welding Cost Breakdown (2026)
Here’s what the specific jobs run in the Pomona market this year. These are retail part prices plus labor for a residential gate, not a commercial sliding gate or a large property perimeter. If your gate is electric, expect the hardware side to add up quickly, but the labor to install it is predictable.
| Job | Typical Cost Range | What It Covers |
|---|---|---|
| Hinge re-weld (single) | $180 – $280 | Grind, prep, and re-weld a failed hinge barrel or weld plate |
| Latch or latch receiver replacement | $150 – $260 | New latch, receiver, and alignment weld |
| Roller and track parts (per gate leaf) | $220 – $420 | Replace worn rollers, straighten or replace a section of track |
| Gate frame straightening and re-weld | $350 – $650 | Correct a bent frame or sagging hinge post, re-weld the joint |
| Hinge post replacement (set in concrete) | $450 – $900 | Dig out, reset, and weld a new post to the frame |
| Electric gate motor or operator replacement | $550 – $1,400 | Operator unit, wiring, and mount for a residential swing or slide gate |
| Control board replacement | $280 – $600 | Board swap for LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, or Mighty Mule |
| Safety sensor and safety edge parts | $180 – $450 | Photo-eye or safety-edge replacement and wiring |
| Access control (keypad, transmitter, receiver) | $200 – $550 | Keypad or radio receiver install and programming |
What drives cost up or down is mostly about how the failure happened. A clean hinge weld on a steel gate is quick. A hinge that tore the metal around it means we’re rebuilding a section of the frame before we can re-hang it, and that takes more time and material. On the electric side, brand matters less than we’d expect because we work on all nine makes, but the part itself is the biggest variable. A Mighty Mule board and a DoorKing board are not the same part, and they aren’t priced the same. We carry diagnostic knowledge for all of them, so you’re not paying for a tech to figure out the brand on your driveway.
What Affects Gate Parts & Welding Pricing in Pomona
Pomona has a few things working on gate hardware that a general contractor from out of the area won’t recognize. Here’s what actually moves the price here.
- Gate material and thickness. Wrought iron, steel, and aluminum weld very differently. Aluminum requires a different process and rod, and thin ornamental iron can burn through if the welder isn’t experienced with it. The job is priced around the metal, not the size of the gate. Heavy steel frames cost more to work but hold a weld better than thin tube gates do.
- Whether the gate is manual or electric. A manual gate repair is often under $300. The moment an operator, control board, or safety sensor is involved, the price jumps because the part is the cost. We treat electric gate repair as core work, so you get one specialist rather than a welder who subcontracts the automation side.
- Hinge post condition and concrete. A hinge post that has shifted in the ground means resetting it in new concrete, which is more labor and materials than a straight weld. We see this often on gates that have taken a hit from a car or a landscaping truck turning too close to the driveway.
- Pomona’s heat and dry-season dust. Summer temperatures and windblown dust from the Santa Ana winds accelerate wear on rollers, hinges, and track. Gates in the flat neighborhoods get gritty, and that grit chews through moving parts faster than corrosion would. We see this on gates that haven’t been serviced in years, and the fix is often a roller and hinge replacement rather than a repair.
- Brand-specific part availability. Some brands are easier to source parts for than others. Because we service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule side by side, we know what’s in stock and what needs to be ordered, and we tell you that before we quote. A part that has to be ordered pushes the job out a few days but doesn’t usually inflate the price.
- Gate access and clearance. A gate set tight against a wall, blocked by landscaping, or mounted on a hillside property takes longer to work on. Access to the hinge and post is part of the quote because we can’t weld what we can’t reach.
If your situation combines a bent frame and an electric operator that won’t respond, that’s the higher end of the range. We’d rather quote the whole thing in one visit than send two techs on two days. Call (855) 382-5690 and describe the gate and we’ll give you a realistic range on the phone.
How to Save on Gate Parts & Welding
The single biggest savings lever on a gate repair is catching it before a weld fails completely. A hinge that’s loose or squeaking is a $180 job. A hinge that tore out the frame is a $600+ job because the gate frame has to be rebuilt. Here’s how we tell Pomona owners to keep costs down:
- Service the moving parts before they fail. Lubricating hinges, latches, rollers, and the chain or rack on a sliding gate extends part life and delays the repair. It’s the cheapest maintenance you can do on a gate.
- Get the free estimate before you approve anything. We quote the part and the labor separately, so you know what you’re paying for. If you’ve been quoted a huge number for a part that shouldn’t cost that much, get a second look. Estimates are free, and we’re happy to be that second opinion.
- Repair before replacing when the frame is sound. If the gate frame is straight and the weld points are healthy, a parts replacement and re-weld is almost always cheaper than a new gate. We work repair-first, because replacing a gate that only needed two hinges is a waste of money.
- Fix the operator only if the gate itself is healthy. The reverse is also true. Replacing a control board on a gate with a sagging hinge post just means the new operator works harder against a broken gate and fails sooner. Fix the structural side first when both are damaged.
- Ask about the brand you already own. We don’t steer you toward a brand we happen to stock. If your DoorKing operator can be repaired with a new board, we tell you. If a Mighty Mule unit is beyond economical repair, we tell you that too, and we can install the replacement because we work on both sides of the job.
We also don’t charge for a service call to look at a gate that needs welding, and estimates are always free. Call (855) 382-5690 to get a number, not a sales pitch.
FAQs – Gate Parts & Welding Cost
How much does gate welding cost in Pomona?
Gate welding in Pomona typically costs $180 to $650. A single hinge or latch re-weld is at the bottom, and a frame straightening or hinge post reset runs toward the top. The metal type matters more than the gate size. Call (855) 382-5690 for an exact quote and free estimate.
Is it cheaper to repair or replace a gate?
Repair is almost always cheaper when the frame is straight and the weld points are healthy. A $320 hinge and latch repair beats a $2,000+ new gate every time. Replacement makes sense when the frame is bent, the posts are failing, or the gate has reached the end of its service life. Call (855) 382-5690 and we’ll tell you honestly which one applies to your gate.
Can you fix my electric gate the same day?
Yes for many common failures. Motor, sensor, and control board issues on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems are often back in service today, assuming the part is in stock. Brand-specific part availability is the one variable, and we’ll tell you before we commit. Call (855) 382-5690 to check.
Why does my gate need welding instead of just a new hinge?
Because the hinge failed at the weld, not the barrel. On a gate that’s been hit or has taken years of use, the hinge plate tears away from the frame. Replacing the hinge without re-welding the mounting point just puts a new hinge on a broken frame, and it fails again. Re-welding runs $180 to $280 for a single hinge and is the correct fix. Call (855) 382-5690 with a photo if you’re not sure what failed.
Do you work on my gate brand?
Most likely, yes. We service three focused lines (gate repair, electric gate repair, and gate installation) across nine brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Contact us at Gate Repair Pomona for a free estimate and we’ll confirm parts availability for your specific model. Call (855) 382-5690.
What does gate parts and welding cost if the operator is also broken?
Budget $900 to $2,200 when both the gate frame and the electric operator need work. The welding is often $350 to $650, and the operator parts (motor, control board, or sensors) add $250 to $1,400. Doing both in one visit is cheaper than two separate calls. Call (855) 382-5690 to get a number on your specific situation.
Get a Free Gate Parts & Welding Estimate in Pomona
We’re a single-trade specialist, not a general fence company that happens to own a welder. Every call we take, every tool we carry, and every part we stock is oriented around gates, and the automation side is core work, not an upsell. If your gate is sagging, a hinge has failed, or an operator has gone silent, we’d rather diagnose the exact problem than guess. Call (855) 382-5690 for a free estimate. We’ll give you a real number over the phone and back in service today whenever the part allows.
Pricing reflects the Pomona market as of 2026. Gate Repair Pomona offers free estimates – call (855) 382-5690.
What Our Customers Say
"Fixed the immediate problem. He was honest that the operator is near end of life and I should budget for a replacement, which I appreciate even if it wasn't what I wanted to hear."
- Gilbert Torres"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
- Brooke Thompson"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
- Steven Nguyen